Tel: 01503 232737 Email: info@thepolescompany.co.uk

Follow us:
About Us
Contact Us Form
Customer Service
Terms & Conditions
About Us
Helpful Links
Brochures & Fitting Guides
How Many Rings Will I Need?
Hanging Curtains
External Links
Main Pages
Curtain Tracks and Rails
Bay Window Curtain Poles
Wooden Curtain Poles
Silent Gliss
Follow us:
Subscribe to our newsletter
and recive our offers
The Poles Company
Search Your Cart   Continue Shopping

Rolls 35mm Neo For Bays Chrome Bullet

(Code: 2538RB1D120)
Select Pole Length :

Email to a Friend
Add to Favorites
£ 12.50
Add to Basket
Rolls 35mm Neo For Bays Chrome Bullet
  1. #Specification# Details & Specification tick

    Rolls Neo is available in complete component form to enable you to build your own bay window pole kit. On this page, you buy the parts you need to create your own bay window curtain pole kit. Suitable for Medium weight curtains up to 11kgkg and represents excellent value.


    How Does It Work? This bay pole system works with corner joints that will connect two pieces of pole at each corner and is flexible to suit any angle up to 120°. Shallow Passing brackets support each side of the corner joint (10-15cm from joint) and "C" rings which will pass over the passing brackets. For 90° right angle bay and bends up to 120° a double knuckle is required. See diagram in Bay Windows Tab.


    Recommendation: We recommend maximum installation height 220cm from the floor.
    We recommend you check out tips to install and what bay shapes this product is suitable for click on the " Bay Windows" tab.

    We recommend you check out the Bay Measuring Guidelines


    N.B. THIS PRODUCT IS NOT SUITABLE FOR EYELET CURTAINS IN A BAY WINDOW


    Need a matching complete pole set for a straight window? Here is Rolls 35mm Neo Bullet Chrome complete set for straight windows


    WHAT TO DO?
    1. Click on Bay Windows Tab for tips to install, what components you may need , and Bay shapes that this product is suitable for.
    2. Click on Components in Related Items to see details and dimensions of components
    3. Check out the Bay Measuring Guidelines

    Pole Material Steel   Can I cut Pole down myself tickUse fine tooth hacksaw
    Pole Diameter 35mm   Will Bracket ceiling fix? cross
    Bracket Projection Overall 122mm   Is a ceiling fix bracket available? crossNot for use in Bay windows
    Bracket Depth 63mm   Rings Nylon Lined tick
    Bullet Finial Length 88mm   Extra Rings Avalable? tick
    Bullet Finial Diameter 48mm      
          Check out all Rolls Neo Component Dimensions here


    SPECIAL NOTE FOR: COLOURS-FINISHES-COMPATIBILITY -Please note that colours described on our website products relate to the finish of the pole or trac,k and not necessarily to the material of the product unless otherwise stated.
    Beware - Components from different manufacturers or ranges are not necess

  2. #Bay Windows# Bay Windows tick

    We Recommend for best results:-
    1.
    Connect uncut pole onto the corner joints for best results achieving smooth running of rings over corner joints i.e.wherever possible use the clean machined cut end on the joint. For instance, for the centre section, the pole length should be cut in half so that the corner joints on each side will have uncut ends. The two halves should be trimmed at the centre, spliced using an internal joiner, and the join sits in the centre bracket.

    2. Maximum installation height 220cm off floor - attempting to draw the curtain over the corner joints on installations over 220cm can be difficult.

    3. 90degree corners need a 10cm segment of pole with a corner joint in each end of it. "C" rings will not travel around the single joint if it is fitted at 90degrees. We recommend this for angles between 90deg to 120deg for best results.See diagram below showing segment for 90degree corners.

    thumbsupThis Pole Is Suitable For...

    1-Bend LH 1- Bend LH Rev 1- Bend RH 1- Bend RH Reverse 2 Bend 2 Bend Reverse 2 Bend Right Angle
    tick tick tick tick tick tick tick
               
    2 Bend Right Angle Reverse 4 Bend 4 Bend Reverse 5 Bend 5 Bend Reverse Gradual Curve Gradual Curve Reverse Bends
    tick tick cross cross cross cross cross
    eyelet curtain
     

    Eyelets cross

    Bends from 90°(top L image) to 120° need double joint for rings to go round. Rings will not work on a single joint 90°. A 10cm segment/offcut of pole will be required per bend.
     

  3. #What You Will Need?# tickYou Will Need  
    1.
    Pole lengths
    tick
    Ensure you have enough pole lengths - avoid too many cuts per pole. Ideally one cut per pole.
    2.
    Finials
    tick
    Sold in pairs
    3.
    Standard Brackets  
    tick
    Usually 3 required. One at each end by the finial and one in the centre of the bay
    3.
    Passing Brackets
    tick
    We recommend 2 per bend positioned approx 10cm each side of joint
    4.
    Corner Joints  
    tick
    1 per bend except for right angled corners when you will need 2 per bend (see diag below)
    5.
    Standard Rings  
    tick
    For part of the curtain that does not need to travel over Passing Brackets
    6.
    "C" Rings  
    tick
    Necessary for any part of the curtain that has to travel over the Passing Brackets
    7.
    Internal Joiner  
    tick
    We recommend pole for centre section of bay to be 2 halves. Joiner required.

    Not sure what to order? Send us your bay sizes via our Bay Windows Measuring Guide and we will work it out for you.


    Need a matching complete pole set for a straight window? Here is Rolls 35mm Neo Bullet Chrome Cylinder complete set


    Need to check the colour? Request a sample here.

  4. #Delivery & Downloads# Delivery and Downloads tick



    deliveryDispatch Times

    deliveryDownloads

    Normally 2-3 working days pdf Rolls Neo Bay Installation Info  
      pdf Rolls Neo Leaflet pdf Do I Need More Rings?